CS3/Epson R1800 Printer problem - Graphics

"Frank Arthur" <Art@Arthurian.com> wrote in message
news:Z0yfi.2371$c_4.715@bignews2.bellsouth.net...
> Using CS3 with an Epson Stylus Photo R1800 & Windows XP Home. Working like
> a charm. Beautiful prints and still getting beautiful prints except a new
> problem appeared:
> To make a print I go into Page Management, set up the defaults including
> setting ICM and checking Off(No color adjustment) then Print. All works
> fine.
> When I click on another similar image to print all of the Page Management
> defaults that I set revert to their original settings so I now have to set
> all the defaults again- and have to do so every time I want to make
> another print.
> Any suggestions?
>
>
>
I believe that you would have default settings for the R1800 that would be
reverting each time you go to a new image. You could change those default
settings to the ones you are using most by going to the Control Panel and
then Printers and Faxes and right clicking on the R1800 and then clicking on
Properties. Setting ICM and checking off (No color adjustment) should then
get you that everytime you go to a new image in Photoshop.
You may also be aware that for the R1800 you can go to Custom Settings, set
up your defaults and then save them under a name that you choose?

--
Jan Alter
bearpuf@verizon.net
or
jalter@phila.k12.pa.us

"Jan Alter" <bearpuf@verizon.net> wrote in message
news:mqzfi.5019$9b5.3660@trndny05...
> "Frank Arthur" <Art@Arthurian.com> wrote in message
> news:Z0yfi.2371$c_4.715@bignews2.bellsouth.net...
>> Using CS3 with an Epson Stylus Photo R1800 & Windows XP Home.
>> Working like a charm. Beautiful prints and still getting beautiful
>> prints except a new problem appeared:
>> To make a print I go into Page Management, set up the defaults
>> including setting ICM and checking Off(No color adjustment) then
>> Print. All works fine.
>> When I click on another similar image to print all of the Page
>> Management defaults that I set revert to their original settings so
>> I now have to set all the defaults again- and have to do so every
>> time I want to make another print.
>> Any suggestions?
>>
>>
>>
> I believe that you would have default settings for the R1800 that
> would be reverting each time you go to a new image. You could change
> those default settings to the ones you are using most by going to
> the Control Panel and then Printers and Faxes and right clicking on
> the R1800 and then clicking on Properties. Setting ICM and checking
> off (No color adjustment) should then get you that everytime you go
> to a new image in Photoshop.
> You may also be aware that for the R1800 you can go to Custom
> Settings, set up your defaults and then save them under a name that
> you choose?
>
> --
> Jan Alter
> bearpuf@verizon.net
> or
> jalter@phila.k12.pa.us
Thank you Jan. You've been very helpful in settings at Printers &
Faxes. Unfortunately in the R1800 Custom Settings the named defaults
only last for a single print. Ie. I set up for 4x6 Glossy No Borders
Vertical. Works fine. The next time I attempt to print an image the
original defaults to 8 1/2 x 11 Plain Paper etc.
Any more magic in your repertoire?

I believe it works this way so you will have to make decisions about how you
want to print each image.
Adobe is not wrong to set it up this way.
Getting into the habit of checking the settings for the printer and for
Photoshop can help to avoid mistakes.
What I would prefer would be that when you print using Photoshop color
management the paper type selected in the printer driver is automatically
set in the Photoshop paper profile selection. This is something I have more
than once forgotten to change when changing papers.
Ultimately I think that the arbitrary changes made to the way you make
prints in CS3 are no better than previous methods and as such are actually
worse because you have to change ingrained habits for no gain.

Frank Arthur wrote:
> Using CS3 with an Epson Stylus Photo R1800 & Windows XP Home. Working
> like a charm. Beautiful prints and still getting beautiful prints
> except a new problem appeared:
> To make a print I go into Page Management, set up the defaults
> including setting ICM and checking Off(No color adjustment) then
> Print. All works fine.
> When I click on another similar image to print all of the Page
> Management defaults that I set revert to their original settings so I
> now have to set all the defaults again- and have to do so every time I
> want to make another print.
> Any suggestions?
>
>
>

There is a printer problem associated with CS3 which I believe Adobe are
trying to sort out.

Someone suggested a work around on another group. If I can find it again
Ill post it.

babaloo wrote:

> I believe it works this way so you will have to make decisions about how you
> want to print each image.
> Adobe is not wrong to set it up this way.
> Getting into the habit of checking the settings for the printer and for
> Photoshop can help to avoid mistakes.
> What I would prefer would be that when you print using Photoshop color
> management the paper type selected in the printer driver is automatically
> set in the Photoshop paper profile selection. This is something I have more
> than once forgotten to change when changing papers.
> Ultimately I think that the arbitrary changes made to the way you make
> prints in CS3 are no better than previous methods and as such are actually
> worse because you have to change ingrained habits for no gain.
>
>

They are wrong, I can't do two consective prints without it reverting to
its own default.

"Rob" <mesa@mine.com> wrote in message
news:467f27f5$1_1@news.peopletelecom.com.au...
> Frank Arthur wrote:
>> Using CS3 with an Epson Stylus Photo R1800 & Windows XP Home.
>> Working like a charm. Beautiful prints and still getting beautiful
>> prints except a new problem appeared:
>> To make a print I go into Page Management, set up the defaults
>> including setting ICM and checking Off(No color adjustment) then
>> Print. All works fine.
>> When I click on another similar image to print all of the Page
>> Management defaults that I set revert to their original settings so
>> I now have to set all the defaults again- and have to do so every
>> time I want to make another print.
>> Any suggestions?
>>
>>
>>
>
> There is a printer problem associated with CS3 which I believe Adobe
> are trying to sort out.
>
> Someone suggested a work around on another group. If I can find it
> again Ill post it.

Jan Alter has the answer and I put it to use in a practical manner.
I copied my Printer from Printers & Faxes in Control Panel onto the
desktop.Click on the Printer and in Preferences set up your options
and save them under Save Setting.
Just remember to leave the setting for 8 1/2 x 11 Plain Paper and
Portait Orientation when you are not printing Color Prints or other
specialized papers.
Now if only Adobe has a way to keep the box checked in Scale to Fit
Media on their print tab before printing. All the other check boxes
allow the checked box except Scale to Fit Media.
Any ideas?

Frank Arthur wrote:
> "Rob" <mesa@mine.com> wrote in message
> news:467f27f5$1_1@news.peopletelecom.com.au...
>> Frank Arthur wrote:
>>> Using CS3 with an Epson Stylus Photo R1800 & Windows XP Home.
>>> Working like a charm. Beautiful prints and still getting beautiful
>>> prints except a new problem appeared:
>>> To make a print I go into Page Management, set up the defaults
>>> including setting ICM and checking Off(No color adjustment) then
>>> Print. All works fine.
>>> When I click on another similar image to print all of the Page
>>> Management defaults that I set revert to their original settings so
>>> I now have to set all the defaults again- and have to do so every
>>> time I want to make another print.
>>> Any suggestions?
>>>
>>>
>>>
>> There is a printer problem associated with CS3 which I believe Adobe
>> are trying to sort out.
>>
>> Someone suggested a work around on another group. If I can find it
>> again Ill post it.
>
> Jan Alter has the answer and I put it to use in a practical manner.
> I copied my Printer from Printers & Faxes in Control Panel onto the
> desktop.Click on the Printer and in Preferences set up your options
> and save them under Save Setting.
> Just remember to leave the setting for 8 1/2 x 11 Plain Paper and
> Portait Orientation when you are not printing Color Prints or other
> specialized papers.
> Now if only Adobe has a way to keep the box checked in Scale to Fit
> Media on their print tab before printing. All the other check boxes
> allow the checked box except Scale to Fit Media.
> Any ideas?
>
>
Yes. It's generally a poor way to resize.

--
john mcwilliams

"John McWilliams" <jpmcw@comcast.net> wrote in message
news:jqKdnTtwKuKSnR3bnZ2dnUVZ_j2dnZ2d@comcast.com...
> Frank Arthur wrote:
>> "Rob" <mesa@mine.com> wrote in message
>> news:467f27f5$1_1@news.peopletelecom.com.au...
>>> Frank Arthur wrote:
>>>> Using CS3 with an Epson Stylus Photo R1800 & Windows XP Home. Working
>>>> like a charm. Beautiful prints and still getting beautiful prints
>>>> except a new problem appeared:
>>>> To make a print I go into Page Management, set up the defaults
>>>> including setting ICM and checking Off(No color adjustment) then Print.
>>>> All works fine.
>>>> When I click on another similar image to print all of the Page
>>>> Management defaults that I set revert to their original settings so I
>>>> now have to set all the defaults again- and have to do so every time I
>>>> want to make another print.
>>>> Any suggestions?
>>>>
>>>>
>>>>
>>> There is a printer problem associated with CS3 which I believe Adobe are
>>> trying to sort out.
>>>
>>> Someone suggested a work around on another group. If I can find it again
>>> Ill post it.
>>
>> Jan Alter has the answer and I put it to use in a practical manner.
>> I copied my Printer from Printers & Faxes in Control Panel onto the
>> desktop.Click on the Printer and in Preferences set up your options and
>> save them under Save Setting.
>> Just remember to leave the setting for 8 1/2 x 11 Plain Paper and Portait
>> Orientation when you are not printing Color Prints or other specialized
>> papers.
>> Now if only Adobe has a way to keep the box checked in Scale to Fit Media
>> on their print tab before printing. All the other check boxes allow the
>> checked box except Scale to Fit Media.
>> Any ideas?
>>
>>
> Yes. It's generally a poor way to resize.
>
> --
> john mcwilliams

I've been told that, too. I don't see how it makes a difference. Could you
expand on that?

Steve

Steve wrote:

>> Scale to Fit Media

>> Yes. It's generally a poor way to resize.
>>
>> --
>> john mcwilliams
>
> I've been told that, too. I don't see how it makes a difference. Could you
> expand on that?

It is just fine for Post Script output, but letting the driver down-size
raster images obviates the control you have to scale it yourself.