CETK Imaging Codec Test, Partition Driver Test, LAP test.

After implementation, now I'm doing CETK test.
But, I can't solve some problems of fail items.
please give me some answer.


My environment : WinCE 5.0, SAMSUNG 2450 board.

Fails
1. Imaging Codec Test
- I can see this massage :
"Failure loading library "imgcodectk".
Error 126: The specified module or a dependent module could not
be found.
So, I copied imgcodectk.dll, tux.exe, kato.dll and imagingdecoder.cfg
to target device.
but, same error massege returned.

2. Partition Driver Test
- The results of all test cases are "skipped" and I can see this massege.

---------------------------------------------- massege -----------------------
-------------------

ShellProc(SPM_BEGIN_TEST, ...) called
BEGIN TEST: "Verify STOREINFO info gets updated properly", Threads=3,
Seed=12964
WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
WARNING WARNING1. BACK UP DATA ON ALL CARDS AND DISKS that are attached to
the tested device before running this test.2. In the CETK tree control,
right click on this test and choose EDIT COMMAND LINE3. Add the following
switch to the command line: -ZORCH
4. Save the change to the command line. NOTE: It is strongly recommended
that this command line change be made temporary to prevent accidental loss of
data in the future.5. Run the test.ShellProc(SPM_END_TEST, ...) called
END TEST: "Verify STOREINFO info gets updated properly", SKIPPED, Time=0.
137


-------------------------------------------- end of massege ------------------
----------------------

so, I run this test with -zorch switch. but nothing changed.

3. Local Authentication Plug in Test
- test result is below...

</TESTCASE RESULT="PASSED">
<TESTCASE ID=201>
*** vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvv
*** TEST STARTING
***
*** Test Name: Init/Deinit
*** Test ID: 201
*** Library Path: \laptest.dll
*** Command Line:
*** Random Seed: 7473
*** Thread Count: 0
*** vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvv
ShellProc(SPM_BEGIN_TEST, ...) called
BEGIN TEST: " Init/Deinit", Threads=0, Seed=7473
Can not open Key ?
ShellProc(SPM_END_TEST, ...) called
END TEST: " Init/Deinit", FAILED, Time=0.003
*** ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^
*** TEST COMPLETED
***
*** Test Name: Init/Deinit
*** Test ID: 201
*** Library Path: \laptest.dll
*** Command Line:
*** Result: Failed
*** Random Seed: 7473
*** Thread Count: 1
*** Execution Time: 0:00:00.003
*** ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^

</TESTCASE RESULT="FAILED">


According to this result, main problem is "Can not open Key ?".

Does anyone tell me the reason of this massege?




These 3 part of tests are fail...

I need your help.

regards.